HHM H28--DIPHENYL OXIDE
		HHM H28 Diphenyl Oxide (Diphenyl Ether) is a kind of colorless crystalline or liquid with fragrance of geranium in normal temperature. It dissolves in organic solvent such as alcohol, ether, acid and benzene, not dissolve in water. The melting point is 27℃, the boiling point is 259℃, the flash point is 115℃ and the specific gravity is 1.086（20℃）.
raw materials ：chlorobenzene,phenol. Downstream products：decabromodiphenyl ether,diphenyl-diphenyl oxide heat transfer oils, etc.
HHM H28--DIPHENYL OXIDE Product Physical And Chemical Data
Appearance		colorless crystalline or liquid with fragrance of geranium in normal temperature.
Composition		DIPHENYL OXIDE/DIPHENYL ETHER
CAS NO.		101-84-8
HS NO.		2909309090
Molecular Formula		C12H10O
Molecular Weight		170.22
Moisture PPM（mg/Kg）		≤300
Flash point/℃		115
Melt Point/℃		28
Boilling Point/℃		257
Density     kg/M3		1.07(20℃)
Solubility		Insoluble in water, acid and alkali. Soluble in alcohol, benzene and other organic solvents.
PACKAGE	200KG/ GALVANIZED IORN DRUM
	Liquid  ISO TANK
HHM H68 DIPHENYL Application
1. Mainly used for Heat Transfer oil. 26.5% HHM68+73.5% HHM 28 can be HHM H400, which  may serve as liquid phase organic thermal carrier, and it may also be used as gas phase organic thermal carrier by utilizing its evaporation-condensation properties, so it is the top choice organic thermal carrier to be used for 12℃～400℃ liquid phase heating system or 257℃～400℃ gas phase heating system.
2.Used in the production of flavoring.
3. Used in the production of Decabromodiphenyl oxide.
4.  4. Used in production of synthetic resin and other organic synthesis.
HHM H28--DIPHENYL OXIDE Production method
Phenol potassium and chlorobenzene in the role of catalyst copper powder, after pressure combined heating, cooling, separation, and then to vacuum distillation.
HHM H28--DIPHENYL OXIDE Storage And Handling
【Precautions for safe handling 】 Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. 【Conditions for safe storage, including any incompatibilities 】 Store in cool place. Keep container tightly closed in a dry and well-ventilated place.  【Specific end uses 】 no data available
HHM H28--DIPHENYL OXIDE Hazards Identification
【Inhalation】Dust is irritating to the respiratory tract. Causes irritation of the mucous membrane and upper respiratory tract. Inhalation may cause headache, numbness of the limbs, flaccid paralysis, nausea, or vomiting. 【Skin】Causes severe skin irritation. May be absorbed through the skin. 【Eyes】Causes eye irritation. 【Ingestion】Causes gastrointestinal irritation with nausea, vomiting and diarrhea. May cause gastric disturbances and electrolytic imbalance. May cause systemic toxic effects on the heart, liver, and kidneys. May cause central nervous system depression. 【Hazards】Emits toxic fumes under fire conditions. 【UN (DOT)】SOLID 3077 LIQUID 3082
HHM H28--DIPHENYL OXIDE First Aid Measures
【Ingestion】Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. 【Inhalation】Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. 【Skin】Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. 【Eyes】Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
HHM H28--DIPHENYL OXIDE Fire Fighting Measures
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion. Extinguishing media: Water spray may cause frothing. In case of fire, use carbon dioxide, dry chemical, or water fog. Solid streams of water may spread fire.